DOWNLOAD STEINS GATE FOR IOS
Model trucks, heavily converted from kits but mainly scratch-built
GATEIO TRINITY STATE CHANNELS
Sadly, the model is no longer with us but luckily the pictures are!
Read MoreGATE IO DEBIT CARD
In the past I have had three different CNC machines. Starting with a very basic, mainly home-made machine with a relatively small footprint. This was a good starting point, as it proved that even a very basic setup could give reasonable results.
The second machine featured a larger machining area and was the basis for the third and current setup, having had aluminium profiles as the main construction along with ‘proper’ CNC movement hardware.
Based around the popular Chinese-manufactured 6040 machine which was purchased with only the mechanical parts and didn’t include the motion hardware and controller, as these were migrated from the previous machine. Whilst these Chinese-supplied machines are often dismissed due to quality, I have been more than satisfied with the capabilities of a relatively inexpensive setup.
IO ENDLESS GATE IMPERIAL CHEST
See what 3D printers I use and how I do it.
The Mono X is a UV photocuring LCD type device, using resin as the printing medium and a large build volume of 192 mm x 120 mm x 245mm, the 4k screen resolution produces incredibly detailed parts. The detail obtained by this machine, especially for the low cost is remarkable.
Parts are designed in a 3D CAD program and saved as an STL (Stereo Lithography) file and then imported into the printer’s supplied ‘splicer’ program. This splicing software converts the file into the layers required for printing.
As a rule, supports are required when printing with any 3D printer. These supports are generated automatically by the splicing software but can be manually adjusted if necessary. Supports are sacrificial, meaning that they are easily removed when the printing is completed.
MIRADETODO IO LEYENDA RAGNAROK GATEN 2013 1080P FULL
Featured Model
Copyright 2022 - Keith Sykes